What you will receive:

• 1 x Remote Key Fob Ready To Be Programmed.
• 1 x CR2032 Battery (already fitted)

NOTE* In most cases, people have success with programming in their own remote, however, if you do have any issues then please send us a message and we will help you out as best as we can.

Programming Method:

1. Get in to the van and make sure all doors are closed.
2. Put any key that turns the ignition in to the ignition.
3. Turn the ignition from position “0” to position “II” eight times within 10 seconds.
4. The ignition key will end in the position “II”
5. The door locks will lock and unlock, the van is now in “programme mode” you only have 20 seconds for the next instruction
6. Press any button on the new remote
7. The door locks will lock and unlock, this indicates the remote is programmed
8. Repeat instruction 6 for any existing remotes or new remotes (a maximum of 4 remotes can be programmed)
9. Turn the ignition to position “0” the door locks will lock and unlock to show the programming is complete
Three Button Fob

FAQ / Help:
The above procedure can be attempted as many times as you like, you cannot cause any damage to your van
The procedure must be done within the 8 seconds otherwise the van will not go in to programme mode
If you have no remotes use this procedure to check if your van has the system fitted, if the van locks and unlocks the doors the system is fitted and can have a remote programmed, if you do this just turn the ignition to position “0” to finalise you do not need to programme a remote, this will also erase any remotes, very useful if you have lost a remote or had one stolen, this remote will be erased stopping any unauthorised entry to your van